Sun Panel 3 | Full spectrum LED light panels | Clip onto shelves

description

the sun panel | a full spectrum grow light for seedlings and indoor plants

the sun panel is a full spectrum led grow light for the plants that aren't getting enough sun. Raise seedlings, keep herbs and leafy greens happy, and give your indoor plants the light they're missing, even in a room that barely sees daylight.

Each diode sits behind its own lens, which doubles the usable light and focuses it down onto your plants instead of scattering it around the room. Adjust the brightness and the timer to match whatever you're growing, from the first seedling to a full, leafy shelf.

the kind of light plants thrive in

Plants grow best in light that behaves like the sun, and that's what the sun panel gives them. It covers the wavelengths they use to photosynthesise, so leaves come in greener, growth is stronger, and seedlings stop sitting around waiting for better weather. And because it's a warm, natural white rather than the harsh purple glow of older grow lights, it suits a room you actually live in.

raise sturdy seedlings, keep houseplants happy

Seedlings stretch and turn leggy when they're reaching for light. the sun panel gives them steady, even light from day one, so you get strong stems and roots instead. For established houseplants, it's an easy boost that keeps foliage full and healthy through the darker months.

exactly the light they need, without the guesswork

Every plant wants a different amount of light, and what it wants changes as it grows. the sun panel lets you give each one exactly the right exposure: turn the brightness up or down to suit the plant and its stage, then set the timer and leave it. Your plants get steady, consistent light every day, even when you're away, so they grow healthy without you having to think about it.

lighting specs

• Controller settings8h on / 16h off, 12h on / 12h off, 16h on / 8h off
• Brightness settings100%, 80%, 60%, 40%, 20%
• Light spectrum660nm, 3000K, 4000K
• Output2,000 lumens
• Voltage24V
• Wattage24W per panel
• Beam angle120 degrees
• IP ratingIP20
• Operating temperature-10°C to +40°C
• Lifespan25,000 hours

Photosynthetic photon flux density (PPFD)

• 5cm: 850 µmol/m²/s
• 10cm: 540 µmol/m²/s
• 20cm: 290 µmol/m²/s
• 30cm: 200 µmol/m²/s

what's included

the sun panel comes with everything you need to get growing.

single panel set

• 1 × sun panel (605 × 134 × 20mm)
• 1 × light controller
• 1 × power adaptor
• 1 × instruction manual
• mounting clips

triple panel set

• 3 × sun panels
• 3 × light controllers (one for each panel)
• 1 × main wire, so all three panels connect to a single power adaptor
• 1 × power adaptor (one adaptor powers all three panels)
• 1 × instruction manual
• mounting clips

heirloom basin (per unit)

• lid and basin set
• 1 × water aeration pump
• 1 × water level indicator
• 18 × gathera antibacterial, food-grade net cups with integrated algae guards
• 18 × rockwool cubes
• hydroponic nutrients
• 1 × hydroponic growing instruction manual

setup

the sun panel mounts with a metal rail, so you can fit it to a shelf you already own.

setting up with the stick-on metal rail

1. Prepare the surface you're attaching the panel to. Wipe it clean to remove any debris that could stop the adhesive sticking, then let it dry.
2. Peel the adhesive backing off the tape on the metal rail.
3. Position the rail with the tape against the surface, then press it on firmly.
4. Hold it in place for 30 seconds to get the best adhesion.
5. Use the mounting points on the panel to slide it into the groove of the rail.
6. Connect the electronics as described in the manual, and you're up and running.

setting up with the screw-in clips

1. Mark where you'd like your first clip, then screw it into your shelf.
2. To place the second clip accurately, slot the panel into the first clip using its mounting point. Move the panel to show where the second clip should sit (it lines up with the second mounting point), mark the spot with a pencil, then move the panel aside and screw in the second clip.
3. Connect the electronics as described in the manual, and you're up and running.