Sun Panel 3 | Full spectrum LED light panels | Clip onto shelves
$129.99 - $359.99
add a grow light to the shelf or cabinet you already have
- 605 × 134 × 20 mm a panel
- timer: 8, 12 or 16 h
- 5 brightness settings
Will it fit your shelf? Size, mounting and power are all in one place below.
what owners see happen
- plants doing better“My plants are doing so much better”read what owners say
“My plants are doing so much better since installing the sun panel.”
all reviews“These were better than I expected! Loving them for my carnivores cabinet!”
- strong seedlings“my tomato seedlings are loving it!”read what owners say
“So far working great, my tomato seedlings are loving it!”
all reviews“…the seedlings under them are growing well and the timer works.”
- easy to put up“Light was easy to install”read what owners say
“Light was easy to install…”
all reviews“So much easier to provide light to a large amount of plants!”
the shelf you already have, with its own light
You don’t need new furniture or a sunny window. The panel is 20 mm thin and fits under the shelf or inside the cabinet you’ve already got, so the plants below get their own light. It’s a warm, natural white, so it suits a room you live in.
“These were better than I expected! Loving them for my carnivores cabinet! So much easier to provide light to a large amount of plants!”
will it work on my shelf?“My plants are doing so much better since installing the sun panel. Light was easy to install…”
This is the single panel kit. The triple set comes with three panels and three controllers, and still one adaptor, so there’s just one plug in the wall.
will it work on my shelf?
| Will it fit? | Each panel is 605 × 134 × 20 mm. Measure the underside of your shelf, and it needs to be at least that long and deep. |
|---|---|
| How does it attach? | Every box has both: a stick-on metal rail, or screw-in clips if you’d rather fix it in. No drilling needed with the rail. The panel slides into place. |
| Will it reach the socket? | Yes. The cord is long enough to reach the socket from your shelf. |
| Can panels go in different places? | A triple set runs from one adaptor and a main wire, so it suits shelves that sit close together. A single has its own adaptor. |
| Mesh or metal shelves? | Zip ties are best for fixing the panel to a mesh or metal shelf. |
and it’s easy to live with
Fit it once, set the timer, and it looks after itself.
swipe or scroll
set it once, for your plants
Three things decide how much light your plants get: how long, how bright, and how close.
swipe
one panel or three?
Same panel. The difference is how many shelves you’re lighting, and how close together they are.
| compare | single panel | triple panel set |
|---|---|---|
| best for | one shelf or cabinet | a few shelves close together |
| panels | 1 | 3 |
| controllers | 1 | 3, one for each panel |
| power | 1 adaptor | 1 adaptor and a main wire |
| mounting | rail and clips, both included | rail and clips, both included |
questions about the sun panel
Quick answers before you buy, with every spec in one place.
can’t find it? chat with usfitting it
How do I fit it with the stick-on rail?
- Clean the surface and let it dry.
- Peel the backing off the tape on the metal rail, press it on firmly and hold for 30 seconds.
- Slide the panel into the groove of the rail using its mounting points, then connect the electronics as the manual shows.
How do I fit it with the screw-in clips?
- Mark and screw in the first clip.
- Slot the panel into that clip and use its second mounting point to mark where the next clip goes.
- Move the panel aside, screw in the second clip, slot the panel back and connect the electronics.
What’s in the box?
single panel
- 1 sun panel
- 1 light controller
- 1 power adaptor
- instruction manual
- stick-on metal rail and screw-in clips
triple panel set
- 3 sun panels
- 3 light controllers, one for each panel
- 1 main wire, so all three connect to one adaptor
- 1 power adaptor
- instruction manual
- stick-on metal rail and screw-in clips
The panels are white. Earlier versions were black, so don’t let older photos throw you.
using it
How does the timer work?
You can set the daily cycle to 8, 12 or 16 hours on. It then runs by itself each day.
What brightness settings are there?
Five: 100%, 80%, 60%, 40% and 20%. Start low and step it up over a few days.
Which settings suit my plants?
Watch the leaves. If they get crisp around the corners, the light is too close or too bright. If they reach towards the light, it’s too far or too dim. Seedlings stretch and turn leggy when they’re short of light, so give them steady light from day one.
Can I use it with a smart plug?
You can. If you do, it’s best to skip the built-in controllers and let the smart plug run everything, so your on and off times are set in the smart plug. You won’t be able to adjust the brightness without the controllers, and on a triple set all three panels will follow the same schedule.
parts and help
My controller has failed. Is it covered?
Under warranty, we replace it. After warranty, we can sell you a spare. Message customer service with your order number.
Can I buy a spare controller or adaptor?
Yes, we have both. They aren’t listed on the site, so message customer service and we’ll sort it out. If one part ever fails, you replace that part, not the whole light.
What warranty does it come with?
1 year from purchase, on top of your rights under Australian Consumer Law.
What are the specs?
| light | |
|---|---|
| Spectrum | 660 nm, 3000 K and 4000 K |
| Output | 2,000 lumens |
| Beam angle | 120 degrees |
| Light level (PPFD) | 5 cm: 850 · 10 cm: 540 · 20 cm: 290 · 30 cm: 200 µmol/m²/s |
| Lifespan | 25,000 hours |
| controls | |
| Timer | 8, 12 or 16 hours on each day |
| Brightness | 100%, 80%, 60%, 40%, 20% |
| power and size | |
| Power | 24 W per panel, 24 V |
| Panel | 605 × 134 × 20 mm |
| Rating | IP20, for use from -10 °C to +40 °C |
